Eaton 19050T Two-Speed Differential Carrier
The Eaton 19050T is a heavy-duty two-speed differential carrier designed for Eaton drive axle applications requiring two selectable axle ratios within the same carrier assembly. The two-speed design allows the axle to operate in a lower numerical ratio for normal road operation and shift to a higher numerical ratio when additional pulling power or low-speed torque is required. This design was commonly used in vocational, construction, municipal and other severe-duty truck applications where both road speed and low-speed performance were important.
The 19050T uses a 36-spline axle/side gear configuration with Eaton side gear 126000. The carrier uses a 34-spline, approximately 1.790-inch input/pinion spline configuration.
Technical Specifications
- Manufacturer: Eaton
- Model: 19050T
- Product Type: Heavy-Duty Two-Speed Differential Carrier
- Axle / Side Gear Splines: 36 involute splines
- Side Gear: 126000
- Input / Pinion Splines: 34
- Input Spline Diameter: approximately 1.790 in.
- Carrier Casting Number: 113643
- Differential Carrier & Bearing Cap Assembly: 85995
- Wheel Differential Kit: 121748
- Wheel Differential Case Kit: 121807
- Bearing / Seal / Gasket Kit: RA24R
- Common Differential Bearing Kit: RA-23-D
- Configuration: Two-speed / planetary double reduction axle carrier.
Available 19050T Ratios
The Eaton 19050T was produced in several two-speed ratio combinations, including:
- 4.56 / 6.34
- 4.88 / 6.78
- 5.29 / 7.35
- 5.57 / 7.75
- 6.14 / 8.55
- 6.57 / 9.14
- 7.17 / 9.97
Because the 19050T is a two-speed carrier, both ratios should be confirmed when identifying a replacement. A carrier identified only as “4.88,” for example, is more completely specified as 4.88/6.78.
Identification Notes
The standard Eaton 19050T uses 36-spline side gears, unlike some related Eaton carrier families that use different axle spline counts. Eaton parts literature identifies 126000 as the 36-involute-spline differential side gear used in the 19050T.
The 19050T should also not be confused with related models such as the 19050P, 19055T, or special hybrid/Midland configurations. Some related models use different side gears, axle splines or internal components even when the external carrier appears similar.
When ordering a complete replacement or remanufactured Eaton 19050T carrier, verify:
- Both axle ratios
- 36-spline axle/side gear configuration
- 34-spline input
- Carrier casting or identification number
- Shift mechanism and two-speed configuration
- Yoke/input arrangement
- Original axle tag or specification number where available
The Eaton 19050T differential carrier is a proven heavy-duty two-speed axle assembly designed to provide both highway gearing and additional low-speed torque capability in demanding truck applications.

